Specifications
Surface Treatments
Certifications
- ISO 9001 - 2015 Certified
- PED 2014/68/EC
- NACE MR0175/ISO 15156-2
- NORSOK M-650
- DFAR
- MERKBLATT AD 2000 W2/W7/W10
A286 Sheet Stock
A286 Sheets are Ni-Cr austenitic precipitation-hardened steel sheets used for applications requiring high strength and corrosion resistance up to 1,300F (704°C), and for cryogenic applications. The relatively low alloy content and low-cost formulation of Alloy A286 Sheets make it an excellent choice for many applications. A286 Sheets is produced by vacuum induction melting (VIM), followed by vacuum arc (VAR) or electro slag remelting (ESR). A286 Sheet Applications include jet engine, supercharger, and missile components including: wheels and blades, casings, afterburner and sound suppressor parts, fuel nozzles, fasteners, extrusion tooling, miscellaneous hardware.
A286 Sheet Specifications
Dimensions : ASTM, ASME, and API
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Thickness : 4mm-100mm
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Surface Finish : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, chequered, embossed, hairline, sand blast, Brush, etching, Hot rolled plate (HR), Cold rolled sheet (CR), SATIN (Met with Plastic Coated) etc
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
A286 Sheet Applications
- Food Processing and handling
- Heat exchangers
- Chemical process vessels
- Conveyors
- Architectural
- Marine
- Pharmaceutical equipment
Cres A286 Sheet Forms
A286 Loose Sheet
A286 Packet Sheets
A286 Sheet Chemical Properties
| Element | Properties |
|---|---|
| Ni | 24-27% |
| Cr | 13.5-16% |
| Ti | 1.90-2.30% |
| Fe | balanced |
| Al | 0.35% |
| V | .10-.50 |
| Si | 1% max |
| C | .8% max |
A286 Sheet Mechanical Properties
| Ultimate Tensile Strength | Typical: 105 KSI max (724 MPa max) |
|---|---|
| Gauge: .001-.0015 - 125 KSI min (862 MPA min) Gauge .0015-.002 - 130 KSI min (896 MPA min) Gauge .002-.004 - 135 KSI min (931 MPA min) Gauge > .004 - 140 KSI min (965 MPA min) |
|
| Elongation | Gauge: .001-.0015 - 4% min Gauge .0015-.002 - 8% min Gauge .002-.004 - 10% min Gauge > .004 - 15% min |
| Hardness | Rb 90 max |
A286 Sheet Typical Stress Rupture Requirements
A stress of 67.5 KSI min for no less than 23 hours
A286 Sheet Physical Properties
Density: 0.287 lb/in3, (7.94 g/cm3)
Modulus of Elasticity (E): At 70°F (20°C): 28.8 x 103 ksi (199 GPa)
Modulus of Rigidity (G): At 70°F (20°C): 11.2 x 103 ksi (77.0 GPa)
Coefficient of Expansion: 9.47 µin/in.-°F (70°F to 600°F) | 17.0 µm/m-°C (20°C to 300°C)
Electrical Resistivity: 35.8 µΩ.in, (91 µΩ.cm)
Thermal Conductivity: 88 Btu-in/ft2hr-°F, (12.7 W/m-K)
A286 Sheet Surface Finishes
- #1-Hot rolled annealed and descaled. It is available in strip, foil and ribbon. It is used for applications where a smooth decorative finish is not required.
- #2D-Dull finish produced by cold rolling, annealing and descaling. Used for deep drawn parts and those parts that need to retain lubricants in the forming process.
- #2B-Smooth finish produced by cold rolling, annealing and descaling. A light cold rolling pass is added after anneal with polished rolls giving it a brighter finish than 2D.
- #BA-Bright annealed cold rolled and bright annealed
- #CBA-Course bright annealed cold rolled matte finish and bright anneal
- #2 Cold Rolled
- #2BA-Smooth finish produced by cold rolling and bright annealing. A light pass using highly polished rolls produces a glossy finish. A 2BA finish may be used for lightly formed applications where a glossy finish is desired in the formed part.
- Polished-Various grit finish for specific polish finished requirements
Alloy A286 Sheet Imperial Sizes In Stock
| SIZE | WIDTH |
|---|---|
| 0.01″ | 12″ |
| 0.016″ | 36″ |
| 0.016″ | 36″ |
| 0.02″ | 36″ |
| 0.02″ | 36″ |
| 0.025″ | 36″ |
| 0.032″ | 36″ |
| 0.04″ | 36″ |
| 0.04″ | 36″ |
| 0.045″ | 36″ |
| 0.05″ | 36″ |
| 0.063″ | 36″ |
| 0.071″ | 36″ |
| 0.071″ | 36″ |
| 0.08″ | 36″ |
| 0.08″ | 36″ |
| 0.08″ | 36″ |
| 0.093″ | 36″ |
| 0.1″ | 36″ |
| 0.1″ | 36″ |
| 0.1″ | 36″ |
| 0.125″ | 36″ |
| 0.125″ | 36″ |
| 0.125″ | 36″ |
| 0.156″ | 36″ |
Alloy A286 Sheet Metric Sizes In Stock
| SIZE | WIDTH |
|---|---|
| 0.254MM | 304.8 |
| 0.4064MM | 914.4 |
| 0.4064MM | 914.4 |
| 0.508MM | 914.4 |
| 0.508MM | 914.4 |
| 0.635MM | 914.4 |
| 0.8128MM | 914.4 |
| 1.016MM | 914.4 |
| 1.016MM | 914.4 |
| 1.143MM | 914.4 |
| 1.27MM | 914.4 |
| 1.6002MM | 914.4 |
| 1.8034MM | 914.4 |
| 1.8034MM | 914.4 |
| 2.032MM | 914.4 |
| 2.032MM | 914.4 |
| 2.032MM | 914.4 |
| 2.3622MM | 914.4 |
| 2.54MM | 914.4 |
| 2.54MM | 914.4 |
| 2.54MM | 914.4 |
| 3.175MM | 914.4 |
| 3.175MM | 914.4 |
| 3.175MM | 914.4 |
| 3.9624MM | 914.4 |
A286 Sheet Specifications
- AECMA PrEn2171
- AECMA PrEN2119
- AECMA PrEN2172
- AECMA PrEN2173
- AECMA PrEN2174
- AECMA PrEN2303
- AECMA PrEN2304
- AECMA PrEN2398
- AECMA PrEN2399
- AECMA PrEN3510
- A286 AMS 5737
- A286 AMS 5853
- A286 AMS 5895
- A286 AMS 5726
- A286 AMS 5731
- A286 AMS 5732
- A286 AMS 5734
- ASME SA 891 (Type 1, 2)
- ASME SA 638 (Grade 660 Type 1, 2)
- ASME SA 453 (Grade 660 Class A, B, C, D)
- ASTM A891 (Type 1, 2)
- ASTM A638 (Grade 660 Type 1, 2)
- ASTM A453 (Grade 660 Class A, B, C, D)
- BS HR 51
- BS HR 52
- X5NiCrTi26-15
- X4NiCrTi25-15
- X6NiCrTiMoVB25-15-2
- GE C50TF78
- GE C50TF27
- GE C50TF20
- GE B50T1181C
- UNS S66286
- SAE J467-A286
- SPS M-118
- Fairchild MS 301
- 314 Elliott Turbine MS 618 Weatherford WS-881
- Cameron MS-003030
- EN 2399
- PWA-LCS
- GE-S400/1000
- RR SABRe Edition 2
- EN 1.4944
- EN 1.4943
- EN 1.4980
Satisfaction Survey
